Receipts / L20
Line by line
Every claim, with its source.
Sources were fetched on 2026-10-20.
Source
- WP-RA: Wikipedia, "Ratchet (device)". https://en.wikipedia.org/wiki/Ratchet_(device)
| Shot / text | Claim | Source and verbatim support |
|---|---|---|
| hook "WHY DOES A RATCHET ONLY TURN ONE WAY?" | A ratchet allows motion in one direction only. | WP-RA: it "allows continuous linear or rotary motion in only one direction while preventing motion in the opposite direction." |
| toothed wheel + orange pawl + spring | A ratchet is a toothed gear with a pivoting, spring-loaded pawl. | WP-RA: "a pivoting, spring-loaded finger called a pawl" engages the teeth. |
| BACK stroke: pawl rides up the slope, drops, click | Moving one way, the pawl rides over the gentle slope of each tooth; a spring pushes it into the gap, often with an audible click. | WP-RA: the pawl rides over the gently sloped side; a spring pushes it "into the depression between the teeth," often with "an audible 'click'." |
| FORWARD stroke: pawl locked, bolt turns | Moving the other way, the pawl catches on the steep edge and locks. | WP-RA: "the pawl will catch against the steeply sloped edge of the first tooth it encounters." |
| answer "SLIPS OVER ONE SLOPE AND LOCKS ON THE OTHER" | As above. | WP-RA, as above. |
| "HANDLE 45° · BOLT 90°" readout | Computed from the drawing: each forward stroke turns handle and bolt 45° together; each back stroke swings the handle back 45° while the bolt stays. Two cycles per loop = 90°. | Illustrative animation, angles come from the drawing; not a measured wrench. |
| socket-wrench use | "Ratchet" is also used informally for a ratcheting socket wrench. | WP-RA: "the word ratchet is also used informally to refer to a ratcheting socket wrench." |
What the drawing simplifies
- Schematic, not to scale. The wheel has 16 teeth (22.5° apart) so the motion is easy to see; real ratchet wrenches have more, finer teeth (the source fetched gives no number) and the pawl pivots rather than sliding.
- The handle swing is 45° so the loop repeats exactly; real strokes vary.
- Real ratchet wrenches can reverse by flipping the pawl; the source fetched does not describe that, so the loop does not show it.
- No quantities with units, so no unit conversions.
Sources
Found an error?
Tell us at hello@workingshown.xyz or in the comments. We check it against the sources, pin the correction, fix the caption, and log it on the corrections page.
