Receipts / L33

Reel cover: Why does a nozzle make water shoot further?
L33 · · posted 15 Nov 2026

Why does a nozzle make water shoot further?

    Line by line

    Every claim, with its source.

    Sources fetched on 2026-11-14. Schematic, not to scale. The loop assumes the flow rate stays the same while the opening changes (stated on screen as "SAME FLOW"); on a real tap the flow also drops a little as the nozzle closes.

    Source key

    Shot / textClaimSource and verbatim support
    hook, jet speeds up as the nozzle closesA nozzle increases the speed of the water.WP-NOZ: "A nozzle is a device designed to control the direction or characteristics of a fluid flow (specially to increase velocity) as it exits (or enters) an enclosed chamber or pipe."
    answer "SAME FLOW, HALF THE OPENING: DOUBLE THE SPEED." / readout ×1.0 → ×2.0 at 100% → 50%For the same flow, speed is inversely proportional to the opening's area.WP-CONT: "a flow of water through a converging pipe will adjust solely by increasing its velocity as water is largely incompressible." Computation: flow = area × speed, so speed = 1 / opening; at 50% that is ×2.0.
    jet lands at ×1 → ×2 on the rulerA jet leaving level lands at a distance proportional to its speed.Projectile motion: the fall time from a fixed height is the same, so distance = speed × time. Air drag is ignored.
    caption "A nozzle trades pressure for speed"Pressure is converted to speed.WP-NOZ: "In a nozzle, the velocity of fluid increases at the expense of its pressure energy."

    Sources

      Found an error?

      Tell us at hello@workingshown.xyz or in the comments. We check it against the sources, pin the correction, fix the caption, and log it on the corrections page.