Receipts / L35

Reel cover: What is actually inside a fire extinguisher?
L35 · · posted 14 Nov 2026

What is actually inside a fire extinguisher?

    Line by line

    Every claim, with its source.

    Source fetched on 2026-11-14. Schematic, not to scale. The pressure bar is relative (100% = full); no pressure values are claimed. The loop empties the cylinder faster than a real discharge and then resets.

    Source key

    Shot / textClaimSource and verbatim support
    gas and powder in one cylinderIn stored-pressure units the gas and the agent share a chamber.WP-FE: "In stored-pressure units, the expellant is stored in the same chamber as the firefighting agent itself."
    label "NITROGEN", answer "NITROGEN STORED INSIDE PUSHES THE POWDER OUT."The gas is typically nitrogen for dry chemical.WP-FE: "With dry chemical extinguishers, nitrogen is typically used; water and foam extinguishers typically use air."
    caption "the most common type"Stored-pressure is the most common type.WP-FE: "Stored pressure fire extinguishers are the most common type."
    tube from the valve to the bottom, powder leaving through the hoseThe powder leaves through a tube from the bottom of the cylinder.Drawn as the standard layout (a pick-up tube reaching the bottom, so powder and not gas leaves first). Not a quoted claim.
    "GAS PRESSURE" bar falls as powder leavesThe gas expands into the space the powder leaves, so its pressure falls.Boyle's law (WP-BOYLE): at constant temperature the pressure of a fixed amount of gas is inversely proportional to its volume. The bar is computed from the drawn gas volume.

    Sources

      Found an error?

      Tell us at hello@workingshown.xyz or in the comments. We check it against the sources, pin the correction, fix the caption, and log it on the corrections page.